Powder Coating (Parts Powder Coating Services )

Powder coating is the last step that decides how a part holds up and how it looks. We finish in-house, so the same parts we machine and fabricate can be coated and shipped without going out to a separate coater and coming back.

Custom powder coating, on metal parts built to your spec, in the color and finish the job calls for. One supplier, one lead time, one place to call if something needs to change.

What Is Powder Coating?

Powder coating is a finishing process where a dry powder is applied to a part with an electrostatic charge, then baked in an oven until it melts and cures into a hard, even coating. Unlike wet paint, there’s no solvent to evaporate. The powder bonds into a single tough layer that resists chips, scratches, and corrosion far better than a sprayed-on finish.

Our Powder Coating Capabilities

Surface preparation & pretreatment

A coating is only as good as the surface under it. Before any powder goes on, parts are cleaned and pretreated, degreasing, blasting, and a chemical pretreatment that strips oils, rust, and mill scale and gives the powder something to grip. Skip this and the best finish in the world will eventually flake. We don’t skip it.

Color & finish options (RAL palette)

Color comes from the full RAL palette, so matching a brand color or an existing part is straightforward. Beyond color, you choose the finish: gloss, satin, or matte, plus textured and metallic options where you want the surface to hide marks or add a particular look. Tell us the RAL number, or send a sample and we’ll match it.

Materials & Parts We Coat

We coat steel and aluminum parts most often, brackets, frames, enclosures, panels, guards, along with the fabricated assemblies that come off our own floor. From a single prototype to industrial powder coating on production batches, parts up to max size fit our oven. If a part has features that shouldn’t be coated, like threaded holes or mating surfaces, we mask them before coating so they stay clean.

Why Powder Coating?

Powder coating earns its place for a few practical reasons. It’s tougher than wet paint, standing up to impact, abrasion, and weather without chipping. It resists corrosion, which matters for any part that lives outdoors or in a harsh environment. And it’s a cleaner process, no solvents and very little waste, with overspray powder recovered and reused rather than vented off. A properly coated part can hold its finish for years, often well outlasting a comparable wet-paint job.

In-house Finishing for Machined & Fabricated Parts

Here’s where the finish gets easier and faster: we machine, fabricate, and coat in the same building.

When the shop that made your part also finishes it, the part doesn’t sit in a truck between vendors, and nobody’s waiting on an outside coater’s queue to clear. A bracket can be cut, formed, welded, and powder coated as one continuous job. That means one purchase order, one lead time, and one company accountable for how the finished part turns out, no machinist blaming the coater and the coater blaming the machinist.

Unlike standalone powder coating companies that only finish parts someone else made, we coat parts we built ourselves. It pairs naturally with our CNC machining and metal fabrication work: material and design decided up front with the finish already in mind, so the part is built to coat cleanly from the start.

FAQ

What is powder coating?

Powder coating is a dry finishing process. A fine powder is given an electrostatic charge, sprayed onto a metal part so it clings evenly, then baked in an oven where it melts and cures into a hard, protective layer. The result resists corrosion, chips, and wear far better than conventional wet paint.

It works in three steps. First the part is cleaned and pretreated so the coating bonds properly. Then dry powder is applied with an electrostatically charged spray gun, which makes it wrap evenly around the part. Finally the part is cured in an oven, where the powder melts and hardens into a durable finish.

There’s no flat rate. Cost depends on the size of the part, the color and finish, how much surface prep is needed, and the quantity. Small batches and special colors cost more per piece; larger runs bring the unit price down. Send the part details and we’ll quote it.

Very. A properly applied powder coat resists corrosion, UV fading, chemicals, and everyday wear, and it won’t chip or peel as easily as wet paint. Outdoors, a good coating can hold up for many years before it needs attention. Indoors or in mild conditions, longer still.

Color comes from the full RAL range, so almost any shade is available, including custom matches. For finish, you can choose gloss, satin, or matte, plus textured and metallic options. Texture is useful where you want to hide minor surface marks; metallics and high gloss are common where appearance is the priority.

Yes. We machine, fabricate, and powder coat under one roof, so parts we make can be finished without going to an outside coater. That means one supplier, one lead time, and tighter control over quality, the part is built and finished by people who can see the whole job through.

Request a Quote

Need parts coated, your own, or ones we make from scratch? Tell us the part, the color, and the quantity, and we’ll send a powder coating quote. Machined, fabricated, and finished in one place.